![]() I got the following error and had to activate the USB3.0 controller in the VM settingsįind out which device is the drive (e.g via gparted)Ĭreate partitions following the commands in the instruction.Attach the ISO to the optical drive, boot-up the VM and select Option #6 (start graphical environment) … wait till GUI is loaded.USB: enable USB controller USB 3.0 (xHCI) controller - required so i can use my usb-sata-adapter at the USB3.0 ports of my machine and give the control of the device to the VM (error message: failed to attach the USB device to the virtual machine ).RAM=1024MB Virtual hard disk with fixed size of 1GB (not required so could be less).OS type=Linux Version=Other Linux (64-bit).So i used Virtualbox (current sw: 5.2.6-120293-Win) without the guest extensions and a ISO of SystemRescueCd (current version: 5.2.0 x86). I thought about why not using Linux in a VM. While my main machine is running Windows 10 圆4, i tried to boot an older laptop with a Live-Linux via USB but this fails. An empty M圜loud case (P/N: WDBCTL00 60HWT- 10 … original 6TB Gen2 using FW=2.xx).Hardware i bought and used to setup the Mycloud device: In the subdir WDM圜loud-Gen2, there is a textfile (_Unbrick_en.txt) with a full description of the method/commands i followed and the required wdrecovery-files () i used. While reading all the threads in the WD community, a couple of times a Google Drive with a lot of information is mentioned and many thanks to user Fox_exe to gather all the information. Using an image could also be another source of error. I tested both methods, but i prefered (and in the end i used) the method with the wdrecovery-files, cause it feels more like setting up the device from scratch. Copy the wdrecovery-files (keywords: uImage and uRamdisk) onto a particular partition OR copy a raw-image of Mycloud drive back onto the drive (which includes the software, e.g.Prepare some partitions on the drive following a particular schema, if they’re not present anyways.described in the threads mentioned above), could be summarized like: The methods to setup the harddrive in a Mycloud and get it running with the current firmware (e.g. So i decided to write down my experience, in case others are struggeling with a similar problem and to provide new food for their thoughts. I encountered an error which was not that obvious for me. ![]() In the end it works but not as easy as i thought. So i was confident that my plan (buy an empty case and 8TB wd red, setup the partitions, copy the wdrecovery and fire it up with the current firmware) will work smoothly and could be archieved in a couple of hours. Rebuild your My Cloud or upgrade the HDD on it.How To Unbrick your 2TB/3TB/4TB My Cloud.I read a couple of threads here on how to replace a drive in a M圜loud or how to unbrick a device, e.g. Using virtualbox + system-rescue-cd (live linux) + usb3.0-to-sata HDD adapter for preparing the drive and the wdrecovery-stuff CAN WORK if you power of the drive while still attached to the live-linux WITHOUT giving windows the oppurtunity to f**k up the partitions.Using an 8TB drive for a Gen2 M圜loud works.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |